This modern vertical continuous casting machine for precious/non-precious metal
offers excellent casting results for almost every productions capacity. Advanced
Vacuum-Overpressure Appliance enables also excellent results on difficult-to-cast
metals as manganese content alloys, zinc content alloys etc.
The VCC 400 is designed to be robust and easy to use. All relevant parts are water
cooled by insert steel pipes. These machines are designed for continuous operation.
Customer’s benefit
Very easy handling top results.
For all jewelry alloys, even Palladium White Gold, manganese content
alloys, zinc content alloys.
Only a short training period.
Change of crucible, die, die cooler and stopper rod in a very short time.
Best value-performance ratio.
Complete Data record is available by printer and RS 232-interface.
Mobile data set for remote-control/service.
Application:
All continuous casting applications in factories, even smaller quantities.
For all jewellery alloys, even Palladium White Gold, manganese contenting
alloys, zinc content alloys.
Production of semi-finished product like wire, band and tubes, special profiles
as well in absolute homogeneously structure.
Features:
Manual casting mode.
Low frequency induction heated = excellent mixing of liquid metal.
Generator 15 kW.
Crucible capacity 265 cm³ = 4 kg Au 18 ct ( 78 mm crucible).
Optional bigger crucible set 400 cm³ = 6 kg Au 18 ct ( 88 mm crucible)
instead of standard crucible ( 78 mm crucible).
Temperature up to 1300°C by thermocouple Type N (NiCrSi-NiSi) or 1600°C
by thermocouple type S (Pt10Rh-Pt).
16 Temperature programs.
Melting under protective gas atmosphere.
Round die for wire up to 20mm; sheet up to 20x8 mm; tube up to 35 mm.
Rectangular die for sheet up to 50x8mm, optional 60x8 mm (400 cm³ crucible).
Microprocessor controlled drawing unit with reverse function.
All handling steps pneumatic assisted.
Digital display indicates full supply (air, gas, water) and complete status of
machine at present.
Production machine, continuous operation.
Optional diffusion bonding (sintering) kit.
Data printer for process controlling and service.
|
This modern vertical continuous casting machine for precious metal-non precious
metals offers excellent casting results for almost every production capacity.
The VCC 1000 is designed to be robust and easy to use. All relevant parts of the
machine are water cooled by high grade steel pipes. Therefore, this machine is
designed for continuous operation.
Benefit:
• Very easy handling top results
• Only a short training period
• Change of crucible, dies, and stopper rod in a very short time
• Best value-performance ratio
• Complete Data record is available by printer and RS 232-interface
Application:
• All continuous casting applications in factories, wire up to ø 40 mm, tube up to
ø 50 mm, bands up to 40 x 40 mm in round dies (outside diameter ø 70 mm)
or bands up to 100 x 10 mm in rectangular dies.
• For all jewellery alloys, even difficulty to handle alloys like Palladium White
Gold, silver (degasing!) and manganese alloys.
• Production of semi-finished product likes wire, band and tubes, special profiles
as well in absolute homogeneously structure.
Features:
• Manual casting mode, automatic controlled die temperature.
• Low frequency induction heated = excellent mixing of liquid metal.
• Generator 25 kW.
• 1500 cm3 = 15 kg Ag / 22kg, Au 18ct.
• Temperature up to 1200°C by thermocouple Type K (NiCr-Ni) or 1500°C by
thermocouple type S (PtRh-Pt).
• Melting under protective gas atmosphere or vacuum.
• Wire up to ø 40 mm, tube up to ø 50 mm, bands up to 40 x 40 mm, round dies
outside diameter ø 70 mm or bands up to 100 x 10 mm in rectangular dies.
• Microprocessor controlled drawing unit with reverse function.
• All handling steps pneumatic assisted.
• Digital display indicates full supply (air, water) and complete status of machine
at present.
• Production machine, continuous operation.
• Optional diffusion bonding (sintering) kit.
• Data printer for process controlling and service.
|
