|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic bonded abrasive pellets are an excellent choice for providing a uniform finish on medium hard or soft metal. Improve surface finish gradually from coarse to fine.
|
Plastic bonded abrasive pellets are an excellent choice for providing a uniform finish on medium hard or soft metal. Improve surface finish gradually from coarse to fine.
|
Plastic bonded abrasive pellets are an excellent choice for providing a uniform finish on medium hard or soft metal. Improve surface finish gradually from coarse to fine.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic bonded abrasive pellets are an excellent choice for providing a uniform finish on medium hard or soft metal. Improve surface finish gradually from coarse to fine.
|
Made of carbon steel in various shapes, but uniform in size. Fine shot is the ideal choice of media for burnishing.
|
Unlike carbon steel, this media needs no rust protection. Heavier in weight and corrosion resistant, this shot may be safely used with acid soap solutions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Unlike carbon steel, this media needs no rust protection. Heavier in weight and corrosion resistant, this shot may be safely used with acid soap solutions.
|
Plastic bonded abrasive pellets are an excellent choice for providing a uniform finish on medium hard or soft metal. Improve surface finish gradually from coarse to fine.
|
Granulated walnut shell is a natural carrier for dry tumbling or barrel finishing operations. When charged with polishing oxides, either rouge or chrome, a surface of high luster is achieved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A ready to use polishing agent made of pulverized walnut shell treated with red rouge. When run in excess of 5 hours in a vibratory tumbler this media provides excellent coloring characteristics.
|
Formulated from pulverized corn cob and blended with a polishing agent, this media will eliminate rouge stains. Gives a better finish than Dri-shine I.
|
Finely ground corn cob is an ideal absorbent for drying articles of jewelry. Additionally, it removes water stains, finger prints, or residue left after tumbling with dry media.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These quality stainless steel pins and balls are used in magnetic finishers along with a small amount of mild detergent to assist in superior deburring and polishing operations. For delicate jewelry and sharp inside corners, use smaller sized pins. Accelerated finishing can be accomplished by adding up to 10% of balls with the media pins.
|
Made of carbon steel in various shapes, but uniform in size. Fine shot is the ideal choice of media for burnishing.
|
Made of carbon steel in various shapes, but uniform in size. Fine shot is the ideal choice of media for burnishing.
|
|
|
