Takumi Digital Vacuum Wax Injector - American Jewelry Supply

WAX INJECTOR ONLY (clamps sold separately)

Simple Design and Easy Operation
With the touch panel attached, the operation is easy to understand compared to the conventional model. With VWI and DAC integrated, the design is simple compared to the conventional model.

Vacuum Control System
Vacuum control makes it possible to adjust the air bubble on the wax surface.

Height Adjusting
The clamp height can be easily adjusted by turning the handle by hand, so that the nozzle can be fitted into the rubber mold hole.

Memory
3,000 memory

Clamp (Option)
Normal Clamp: conventional type
Multi Clump: The multi-clamp can be mounted for medium- to large-sized molds.

wax capacity	around 3 kg
temperature setting range	40.0-90.0 °C (103-193 °F)
Injection pressure range	10-300 kpa
vacuum timer range	0-999.99 seconds
clamp pressure range	30-350kPa
heating timer	calendar system
memory	3,000
air supply source	"0.40-0.70 MPa/
pressure gauge: 0-0.2 MPa (0~2 kgf/cm2)"
power supply	single phase AC 100/ 115 V±10%, 50/60 Hz
normal clamp mold size	80(W)x90(D)x40(H)
multi clamp mold size	160(W)×162(D)×85(H)
external dimensions	450 (width)×310 (depth)×450 (height) mm
weight	around 25 kg

Search

Search